TX-3 is a rapid set, high strength low viscosity urethane repair material. This two part, 1:1 system is 100% solids and designed for rebuilding and repairing broken control joints, filling voids under tile and concrete, and repairing spalled concrete surfaces very quickly. TX-3 is intended for use in damaged control joints or warehouse spall damage created by forklifts or carts with steel or hard urethane wheels.

APPLICATIONS TX-3 has an extended pot life for larger repairs requiring more working time.

• Rebuilding control joints

• Traffic area spalls & crack repairs

• Grade matching

• Floor repair

• Fill & repair spall before coating

• Used to “knit” cracked slabs

• Fill voids under concrete or tile ADVANTAGES

• Cures From -20ºF to 130ºF

• Drive-Over in 45 minutes

• Produces High Strength Quickly

• Self-priming and self-leveling

• Can be mixed with dry aggregate

• Meets USDA and FDA Requirements

• Meets the United States Green Builidng Council’s

• LEED® standards for IEQ Credit 4.1

LIMITATIONS

• Do not thin, solvents will prevent proper cure

• Avoid exposure to moisture prior to curing

• Material is a vapor barrier after cure

• Concrete should be at least 28 days old prior to application

Select the color of your choice from our readily available core colors. Available direct color matches to some alternatives is available per request. Just let us know. Note - this 2 gal kit is neutral or clear in color, and would require color pack available here : https://www.grindline.net/product-page/hts-tx-tint

Color chart - https://htspoly.com/assets/documents/hts_color-chart-pe_tx.pdf

Technical Data Sheet - https://htspoly.com/assets/literature/english/hts_tx-3_tds.pdf

Reference - Ameripolish, Euclid/Euco, Metzger McGuire, Prosoco/Consolideck, Scofield, Versaflex.